Skip to content

Adjusta-Watt Retro LED 720w


The Adjusta-Watt Retro LED720w has no driver, meaning the end user can save money by using their existing 600w digital ballast. When connected to a 600w digital ballast and mounted at 15cm above the canopy, the Adjusta-Watt® Retro LED produces an average PPFD of 1231μmol/s/m². That’s over twice the growth light than that of a 600w HPS, for the same power consumption!

Adjusta-Watt Retro LED 720w Features:

  • Driverless, meaning you save money by using a 600w digital ballast with overdrive up to 720w
  • Sol-spec Ultra high PPF and PPE LED’s provide whites, cool blues, warm reds, far reds and balanced greens
  • Folding, folds in half for easy transportation
  • 50k hours, designed to perform over 50,000hrs of operation with 2yr warranty
  • One or two, operates one fixture at 720w or two fixtures at 360w

This highly efficient fixture returns Lower operational costs. It enables the user to manually adjust the output using the dial on your adjusta-watt digital ballast. It has a passive cooling due to its wide area of coverage meaning virtually no heat. The evenly spaced light bars provide consistent coverage of good light levels at the canopy. Highly efficient as all consumed energy is converted to useable light for your plants. It is silent with no noisy fans or moving parts.

One digital ballast can run either one or two Retro LEDs

1x Retro LED @720w 2.7μmol/J
2x Retro LED @360w 2.8μmol/J

Adjusta-Watt Retro LED 720w Specification:
  • Input Power – 720w
  • Dimming modes – Native to ballast
  • Efficiency – 2.7umol or 2.8umol x2 with splitter cable
  • PPF – 1,890
  • Input – Connects to 600w digital ballast
  • Mounting height – >6″ (15cm) above canopy
  • Thermal Management – Passive cooling (fan-less)
  • Lifetime – 50,000hrs
  • Power Factor – >90%
  • Colour rendering index – 80 ra
  • Ambient temperature – -25 to + 40°C
  • Control – Manual via ballast dial
  • Fixture Dimensions – 900mm x 900mm x 54mm
  • No of LEDs – 1992PCS